50W and 100W AC-DC power adapters
Emerson Network Power launched two series of external ac-dc power adapters. These additions to the portfolio of Astec ac-dc power adapters produce fully regulated outputs, and feature a universal 90-264 Vac input. The 50 watt AD50 series power adapters produce a single 12 V output and can deliver up to 4.16 A continuously, while the new 100 watt AD100 series models produce a single 48 V output and can deliver up to 2.08 A continuously. Astec AD50 and AD100 series freestanding ac-dc power adapters provide a pre-approved power solution for a wide variety of portable and desktop applications, including instrumentation, telecommunications, computer peripheral and test and measurement systems.
The AD50 series adapters are also available with medical safety approvals for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications. All Astec AD50 and AD100 series ac-dc power adapters are high efficiency switch-mode designs that comply with the One Watt Input Energy Star/Blue Angel requirement. The AD50 series have a typical power conversion efficiency of 80%, while the AD100 series offer an even higher figure of 90%. The AD50 series adapters are available with a choice of a 3-pin (type C6) or 2-pin (type C8) IEC320 ac input receptacle, to accommodate customers' desired configuration of line cord. The 3-pin versions of the adapters have a safety-ground leakage current of 300 µA maximum, while the 2-pin versions offer an even lower figure of just 100 µA. The adapters' dc output is provided via a cable fitted with a standard 2.5 mm I.D, 5.5 mm O.D. barrel plug.
AD50 series power adapters have a full load ambient operating temperature range of 5sC to +40sC without de-rating, while the AD100 series offers a slightly wider operating range of 0sC to +40sC. All the adapters are protected against overvoltage and overpower conditions, with automatic recovery, and have a MTBF of 300,000 hours at full load and 25sC ambient. They all comply with the EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5, -6, -8 and -11 levels 3. The power adapters also carry a set of safety approvals, including UL/CSA 60950-1,VDE/CB EN60950-1 and CE Mark. The medical versions of the AD50 have the following certifications: UL/CSA60601-1, VDE EN60601-1 and CE Mark LVD.
Pricing starts at US$28.00 for the AD50 models, US$32.00 for the AD50 medical models, and US$56.00 for the AD100 models, in OEM quantities.